Splash Super Pool Parts

SplashPoolParts.com is offering 10% off all pool covers, including solar pool covers and winter pool covers. Now is the time to get your SplashPool ready for winter.  Splash Pool owners in areas where it doesn’t snow might want to consider the solar cover for their Splash Pool. Solar covers use the heat of the sun to warm the water and keep the bugs out of the pool. The solar cover reel comes in two adjustable sizes, 18 ft solar cover reel. and  the 24 ft. solar cover reel, to fit any of the solar covers.

The winter Splash Pool covers protect your pool from leaves and other debris in the cooler months that you aren’t using your pool. Can be used anytime of the year that you want to limit the access to your pool. Winter pool covers come in all sizes to fit perfectly on you Splash Super Pool, Splash Omega, and the Alpha Splash pools.

If you have any questions or need help finding parts for your Splash Pool, please email us at info@SplashPoolParts.com or call us 866-585-2380.

SplashPoolParts.com is happy to offer the manual for all SplashPools for free in PDF format. Please click HERE for the Splash Pool owners manual.

The Splash free manual includes the SuperPool parts list, installing the filter system, installing the skimmer, filling and starting the pool. Omega parts list, assembly instructions, vacuuming your Splash Pool, winterizing your SplashPool, and ladder assembly instructions.

A few things the manufacturer recommend you do before assembling your Splash Pool. be sure that you have an area that is smooth, level and 4 feet larger than the pool you’re assembling. Remove all sticks, rocks, and any sharp objects. Remove and cap off any sprinkler heads, fill voids, depressions or hollows with dirt or sand. Any areas filled with dirt or sand must be compacted prior to  installation of your pool. If you are installing your SuperPool on dirt, sand, or grass, we recommend that you place a plastic sheet or foam pad between your pool and the ground. Splash SuperPools are portable swimming pools, and as a result, most localities do not require the homeowner to obtain any permits. However, it is the homeowner’s responsibility to meet all applicable safety-health codes and zoning regulations.

SplashPoolParts.com is offering 10% off all pool covers, including solar pool covers and winter pool covers. Now is the time to get your SplashPool ready for winter.  Splash Pool owners in areas where it doesn’t snow might want to consider the solar cover for their Splash Pool. Solar covers use the heat of the sun to warm the water and keep the bugs out of the pool. The solar cover reel comes in two adjustable sizes, 18 ft solar cover reel. and  the 24 ft. solar cover reel, to fit any of the solar covers.

The winter Splash Pool covers protect your pool from leaves and other debris in the cooler months that you aren’t using your pool. Can be used anytime of the year that you want to limit the access to your pool. Winter pool covers come in all sizes to fit perfectly on you Splash Super Pool, Splash Omega, and the Alpha Splash pools.

With a depth of five feet, the Alpha is the deepest pool offered by Splash. Our Alpha pools feature the same craftsmanship and quality found in the SuperPool, but satisfies the needs of our customers who long for a deeper pool.

SplashPoolParts.com also offers a complete line of high quality, factory direct,  parts and accessories, including skimmers, filters, sand filtration, pool covers, and so much more to compliment your Alpha Splash Pool. If you need help finding the right parts for your Splash Pool please email us at info@SplashPoolParts.com and we’ll be happy to help!

See you at the pool!!

1. Wall Fitting Installation — Install the two Wall Fittings (H) at the locations labeled “intake” and “return”. Also install the Skimmer Hold Down Fitting (K) in its marked location. Each of these three fittings has two rubber and one paper gasket. These should be positioned as in the diagram above.No thread sealer or Teflon tape is required.

2. Skimmer Installation — From inside the pool, screw hose from bottom of Skimmer (M) into the Intake Wall Fitting, and hand- tighten. No Teflon tape is required. Note: use soapy water to slide hose onto bottom of skimmer. Next, screw the short hose from the side of the Skimmer into the Skimmer Hold Down Fitting (K). Again, hand-tighten. Screw the Eyeball Fitting (P) into the Return Wall Fitting. *Note that “hose side” is imprinted on the 90 Degree Fitting for your convenience. Now is when the person inside the pool will want to get out.

3. Pump and Filter Installation — Please refer to the directions supplied by the manufacturer of your pump and filter.

NOTE: The 17′ x 29.5′ SuperPool has holes for an optional extra skimmer. If you choose not to use an extra skimmer, use the supplied Wall Fittings and plugs to seal holes.

WARNING: The circulation system produces
very strong suction. NEVER lay on or insert
body parts into the skimmer. Always turn off
pump before working on the skimmer.

4. Tighten Fittings – Make sure all fittings connecting the pump and filter are tight.

5. Tape – Wrap Teflon tape on the threads of the Ball Valve (O) going into the Wall Fitting (H) and screw tightly into the
Intake Wall Fitting.

6. Attach Hoses – (Be sure to use only Teflon tape on all Threaded Fittings. Do not use the Teflon tape, however, on the hose side of the Threaded Fittings. DO NOT USE PIPE SEALANT.) Take one of the hoses and attach one end (H) to the Ball Valve (O) using a Gasket. Take the other end (I) and attach it to the suction side of the pump and filter with a Threaded Nipple and a Gasket. Note that “hose side” is imprinted on the Threaded Nipple for your convenience. Once sealed, hose will not spin. Next, attach one end (I) of the second hose to the Return Wall Fitting (H) with a Gasket. Twist the threaded elbow into the Wall Fitting before attaching the hose. Then take the other end (I) and attach it with a Threaded Nipple and a Gasket to the Filter Canister. It is helpful to twist the Threaded Nipple into the Filter Canister before the hose. DO NOT USE PIPE SEALANT. Make sure all connections are tight.

7. Warning Label – Affix the Warning Label on the pool liner at the Top Rail next to the Floating Skimmer. If the Floating Weir and the internal basket of the Skimmer are removed, the resultant strong suction can trap hair or other body parts if they are inserted into the skimmer. Due to this potential hazard, we are recommending that you affix the Warning Label.

WARNING: NEVER work on pump, filter, or
skimmer while pump is operating or serious
injury could occur due to strong suction.

Vacuuming Your Splash SuperPool
WARNING: Do not attempt to remove or install the swimming pool vacuum plate while pump and filter are running. The suction is very powerful; fingers may get pinched between the vacuum plate and the skimmer.
DO NOT swim in the pool while vacuum is running.
WARNING: Keep body parts away from vacuum plate when in place and pump and filter are running.
To vacuum your pool, you may either use an automatic cleaner or the traditional manual method. If you choose the manual method, you will need a 1.5″ flexible pool vacuum hose of adequate length, a vinyl liner vacuum head, and a telescopic pole.
Begin by turning pump and swimming pool filter off, then place vacuum hose on vacuum head or automatic cleaner. Place vacuum (either auto cleaner or vinyl vacuum head attached to end of telescopic pole) in pool, allowing hose to fill with water. Continue to feed hose straight down into water, thus removing air from the hose and replacing it with water. Once you get to the end of the hose, water will come out. Turn swimming pool pump and pool filter on and begin vacuuming your pool.

Automatic Vacuuming
With the pump turned off, place the Vacuum Adapter Plate (“N” on SuperPools, “L” on OmegaPools) on top of the Floating Skimmer Weir (“J” on SuperPools, “H” on OmegaPools). Once the pump is turned on, the suction of the pump will hold the plate in place.
Attach vacuum hose into adapter plate hole. Again, pump suction will hold hose in place. Turn on the pump and filter; the pool is now ready to be vacuumed. The automatic vacuum will run on its own. When pool is clean, turn off pump and filter, unplug vacuum hose, remove vacuum, and remove adapter plate. This is a good time to empty any debris from the Skimmer Basket (“L” on SuperPools, “J” on OmegaPools). Finally, turn pump back on to continue filtering.

Vacuum Kits and accesories are available at SplashPoolParts.com. A complete line of factory parts and accessories for your Splash Pool swimming pools, wading pools, lap pools, Hot Tubs and spas including: pool ladders, solar & winter pool covers, skimmers and vacuums, hoses and all replacement parts for SuperPools, Omega Splash Pools, Alpha Splash Pools, Legend Splash Pools and MUCH MUCH more! Each of our replacement parts and accessories have been chosen to accompany your splash super pools, above ground swimming pool, spas, and will enhance your backyard living experience!
Our highly skilled customer service representatives are available to answer your questions 24 hours a day! Our mission statement is simple – SplashPoolParts.com still believes in excellent customer service! If you have questions regarding any of our products , or need help placing an order please feel free to call us – toll free – 866-585-2380 OR email us at: info@splashpoolparts.com
SplashPoolsParts.com is committed to preserving the privacy of all visitors to our website at splashpoolparts.com. Please read the following privacy policy to understand how we use and protect the information that you provide to us.
By registering or placing an order on this website, you consent to the collection, use and transfer of your information under the terms of this policy.

Congratulations on the purchase of your Splash SuperPool!
A few notes prior to assembly. . .
Be sure that you have an area that is smooth, level and 4 feet larger than the pool to assemble your SuperPool. Remove all sticks, rocks, and any sharp objects. Remove and cap off any sprinkler heads, fill voids, depressions, or hollows with dirt or sand. Any areas filled with dirt or sand must be compacted prior to installation of your pool.
If you are installing your SuperPool on dirt, sand, or grass, we recommend that you place a plastic sheet or foam pad between your pool and the ground.
Splash SuperPools are portable swimming pools, and as a result, most localities do not require the homeowner to obtain any permits. However, it is the homeowner’s responsibility to meet all applicable safety/health codes and zoning regulations.

Should you ever need additional part for your Splash Pool, please visit our site www.SplashPoolParts.com