Splash Super Pool Parts

With a depth of five feet, the Alpha is the deepest pool offered by Splash. Our Alpha pools feature the same craftsmanship and quality found in the SuperPool, but satisfies the needs of our customers who long for a deeper pool.

SplashPoolParts.com also offers a complete line of high quality, factory direct,  parts and accessories, including skimmers, filters, sand filtration, pool covers, and so much more to compliment your Alpha Splash Pool. If you need help finding the right parts for your Splash Pool please email us at info@SplashPoolParts.com and we’ll be happy to help!

See you at the pool!!

We’re running a sale at SplashPoolParts.com! We’ve overstocked on the sand filter replacement hoses and that means savings for you, our loyal customers!

Ever wish all the tools you need to clean your pool were in one, convenient kit? Tired of trying to find where the kids left the pool hose? Where’s the leaf net? We’ve got the answer, the Deluxe Pool Maintenance Kit. We’ve reduced our price to $180.00 and we’re offering FREE SHIPPING on the kit!

This is the Splash Deluxe Maintenance Kit and it contains the following items. 5 ft.-15 ft. aluminum cleaning pole, leaf net, 18 in. curved wall brush, weighted manual vacuum head, floating thermometer, bottle of five way test strips and 35 ft. length of vacuum hose. Taking care of your pool has never been easier!

If we can answer any questions or help you find parts for your Splash Pool, please email us at info@splashpoolparts.com or call us M-F, 8-5 pacific time 1-866-585-2380 and we’ll be happy to help!

One of the most efficient pool filters on the market today is the StaRite 75. Sta-Rite 75 square foot modular media cartridge filter. Sta-Rite 1.0 HP high-flow performance pump. Large capacity trap and an all-weather, smooth-running motor. Cartridge filter hold more dirt than other filters of equal size. Posi-Lok locking ring provides safe, fast access for maintenance of filter. Truly an amazing filter for it’s size.

While this filter will last for many, many fun summers with your pool, you may need to replace parts on the Sta Rite 75. We have the 1 HP replacement pump . We also carry the replacement cartridge for this pool filter. Pressure gauge go bad on your StaRite 75? Be sure and check your 75 Union Half Assembly for wear and tear. If you find you need to replace the piece that joins the pump to the filter, we’re your go to SplashPool parts dealer! We’ve also got the clear trap lid for the PLM-150 and PRC-75

We have these items in stock and we’re offering free shipping on orders over $50! If you can’t find what you’re looking for email us at info@splashpoolparts.com or call us at 1-866-585-2380, Mon. – Fri. 8-5, pacific time and we’ll be happy to help you find your SplashPool Parts!

SplashPool is the brand name for the most affordable and reliable above ground pool being sold today. We have pool hoses, gaskets, filter parts, vacuums, pool covers and solar pool covers for your Splash Pool. We not only sell the parts but we’re here to help you with all your Splash Pool questions.

Need help finding the skimmer assembly for your pool? Click on the word “skimmer assembly”  and you’ll be taken to our online store. All models of the SplashPool, including the Super Pool, Alpha, Omega and Legend use the same skimmer assembly.

By clicking on any of the pool names above you can view all parts available online for your model of pool. If you don’t see what you’re looking for please email us at info@splashpoolparts.com or call us, toll free, at 1-866-585-2380 and we’ll be happy to help.

The first step in the weatherization procedure is to make sure your water chemistry is balanced. You should make sure that your pH, Total Alkalinity, and Calcium Hardness are all balanced. By balancing your water chemistry you are protecting the surface of the pool from staining and etching.

Adding a winterizing chemical kit to your water will help keep it blue and clear for the next season. Be sure to follow the manufacturer’s instructions for the kit.

Do not use a floater that contains a strong oxidizer (chlorine or bromine) as the floater will stick against the wall and stain and/or bleach your wall, especially a vinyl liner. For the same reasons DO NOT throw chlorine or bromine tablets into the pool. They will sink to the bottom and damage your pool’s surface.

When water freezes, it expands. This can cause great damage to your pool, pool plumbing, and its filter system. If you are closing up your pool for the winter, you should always take precautions to protect from freeze damage no matter where you live. You can never be sure that it will not drop below freezing, even in the Sun Belt.

The next step is to lower the water below the mouth of your skimmer(s). This will get the water out of the throat of the skimmer which can be easily damaged if water were to freeze there.

Another option for vinyl liner pools is to put an Aquador over the mouth of the skimmer. This is a plastic dam which holds out the water from the skimmer, allowing you to leave the water level up for the winter. This will help in supporting your cover and also help keep the liner from “floating” if the winter is your rainy season.

Blow out the water from your plumbing lines. You can do this using a shop vac. Use the discharge of the shop vac to blow water out of each line from the filter system. As the water is purged from each line, you will need to put a plug in the lines at the pool end. Some fittings will allow for a threaded plug, which is best. Be sure to use a plug with a rubber gasket or “O” ring to make a seal, or the water may fill the line back up. If your fittings are not threaded, then use a rubber freeze plug.

You should cover your pool to keep out the debris. The type of cover you use will depend upon several factors. Our Splash Pool swimming pool covers provide several functions. They can act as a safety device, preventing children and pets from falling into the pool and drowning. They keep dirt and debris out of the pool, particularly in winter. They also reduce evaporation, retain heat, and can provide solar heat gain if using a solar pool cover.

The final step? You must drain all the water from your filter equipment. Please see the filter manual or contact the manufacturer for full instructions on draining the filter or contact your local pool professional.

Summer is here and a Splash Pool is the place to be! Whether you’ve purchased the Splash SuperPool, Omega Pool, Alpha or have one of the older model Legend SplashPools, it’s important to keep your pool sparkling clear and ready for a summer pool bash. Vaccuming your pool isn’t a hard job but it can be tricky. In this article we offer tips and tricks to making the chore of pool cleaning a breeze.

To vacuum your SplashPool, you may either use an automatic cleaner or the traditional manual method. If you choose the manual method, you will need a 1.5″ flexible vacuum hose of adequate length, a vinyl liner vacuum head, and a telescopic pole.

Begin by turning pump and filter off, then place vacuum hose on vacuum head or automatic cleaner. Place vacuum (either auto cleaner or vinyl vacuum head attached to end of telescopic pole) in pool, allowing hose to fill with water. Continue to “feed” hose straight down into water, thus removing air from the hose and replacing it with water. Once you get to the end of the hose, water will come out. Turn pump and filter on and begin vacuuming.

Automatic Vacuuming

With the pump turned off, place the Vacuum Adapter Plate (“N” on SuperPools, “L” on OmegaPools) on top of the Floating Skimmer Weir (“J” on SuperPools, “H” on OmegaPools). Once the pump is turned on, the suction of the pump will hold the plate in place.

Attach vacuum hose into adapter plate hole. Again, pump suction will hold hose in place. Turn on the pump and filter; the pool is now ready to be vacuumed. The automatic vacuum will run on its own. When pool is clean, turn off pump and filter, unplug vacuum hose, remove vacuum, and remove adapter plate. This is a good time to empty
any debris from the Skimmer Basket (“L” on SuperPools, “J” on OmegaPools). Finally, turn pump back on to continue filtering.

WARNING: Do not attempt to remove or install the
vacuum plate while pump and filter are running. The
suction is very powerful;  fingers may get pinched
between the vacuum plate and the skimmer.

DO NOT swim in the pool while vacuum is running.

WARNING: Keep body parts away from vacuum plate  when in place and pump and filter are running.

Please visit our online store at SplashPoolParts.com and use the coupon code 10percent to receive 10% off of your order! Thanks for visiting and have a great summer in your SplashPool!

1. Wall Fitting Installation — Install the two Wall Fittings (H) at the locations labeled “intake” and “return”. Also install the Skimmer Hold Down Fitting (K) in its marked location. Each of these three fittings has two rubber and one paper gasket. These should be positioned as in the diagram above.No thread sealer or Teflon tape is required.

2. Skimmer Installation — From inside the pool, screw hose from bottom of Skimmer (M) into the Intake Wall Fitting, and hand- tighten. No Teflon tape is required. Note: use soapy water to slide hose onto bottom of skimmer. Next, screw the short hose from the side of the Skimmer into the Skimmer Hold Down Fitting (K). Again, hand-tighten. Screw the Eyeball Fitting (P) into the Return Wall Fitting. *Note that “hose side” is imprinted on the 90 Degree Fitting for your convenience. Now is when the person inside the pool will want to get out.

3. Pump and Filter Installation — Please refer to the directions supplied by the manufacturer of your pump and filter.

NOTE: The 17′ x 29.5′ SuperPool has holes for an optional extra skimmer. If you choose not to use an extra skimmer, use the supplied Wall Fittings and plugs to seal holes.

WARNING: The circulation system produces
very strong suction. NEVER lay on or insert
body parts into the skimmer. Always turn off
pump before working on the skimmer.

4. Tighten Fittings – Make sure all fittings connecting the pump and filter are tight.

5. Tape – Wrap Teflon tape on the threads of the Ball Valve (O) going into the Wall Fitting (H) and screw tightly into the
Intake Wall Fitting.

6. Attach Hoses – (Be sure to use only Teflon tape on all Threaded Fittings. Do not use the Teflon tape, however, on the hose side of the Threaded Fittings. DO NOT USE PIPE SEALANT.) Take one of the hoses and attach one end (H) to the Ball Valve (O) using a Gasket. Take the other end (I) and attach it to the suction side of the pump and filter with a Threaded Nipple and a Gasket. Note that “hose side” is imprinted on the Threaded Nipple for your convenience. Once sealed, hose will not spin. Next, attach one end (I) of the second hose to the Return Wall Fitting (H) with a Gasket. Twist the threaded elbow into the Wall Fitting before attaching the hose. Then take the other end (I) and attach it with a Threaded Nipple and a Gasket to the Filter Canister. It is helpful to twist the Threaded Nipple into the Filter Canister before the hose. DO NOT USE PIPE SEALANT. Make sure all connections are tight.

7. Warning Label – Affix the Warning Label on the pool liner at the Top Rail next to the Floating Skimmer. If the Floating Weir and the internal basket of the Skimmer are removed, the resultant strong suction can trap hair or other body parts if they are inserted into the skimmer. Due to this potential hazard, we are recommending that you affix the Warning Label.

WARNING: NEVER work on pump, filter, or
skimmer while pump is operating or serious
injury could occur due to strong suction.

Having a pool is about revitalizing your backyard experience and creating a comfortable, enjoyable space for family and friends. SplashPoolParts.com can make owning an above ground pool a lot easier. In this article we’ll offer some tips on maintaining your automatic pool cleaner.

Cleaner not cleaning the entire pool?

This can be caused by any number of reasons. The hoses could be too short. Another real common cause is the cleaner could be following the flow pattern of the water in the pool, in other words, strong flow from wall return jets will push the cleaner into a pattern. To fix this; adjust the return port wall fittings, or add wall fittings to the return ports. It helps to point the fittings down or at a downward angle. If you pool doesn’t have wall fittings at the return ports there are alternative wall fittings made by the manufactures to divert the flow.

Unit does not move?

Be sure that the Auto Vacuum is turned on and that no fuses have blown. Check the electrical outlet with another electrical appliance to be sure that power is available. Inspect the unit itself while it’s partially underwater. Is the pump motor receiving power? Is there water gushing out of the top of the unit? This would indicate that power is reaching the unit.

Is the pulley on the drive belt side turning? If the pulley is not moving, this could indicate a shorted motor, or a corroded drive T, which would also require motor replacement.

Is the skimmer bottom suction hose in good repair? Hoses become stretched and weaken over time. If your belts are “skipping” and are not locked into the grooves of either the drive pulley or the wheel tubes, they may need to be replaced. Check that the wheel tubes are in proper position with bushings in place on either end. If the tubes are not straight, the drive belts will not be tight. Do not pull the unit towards the side of the pool, or lift the unit out of the pool by the power cord. Try to reach into the pool and lift the unit only by the handle.

Unit does not pump?

If the unit moves, but does not pick up any debris, lift the unit up near the surface of the water. Does water gush out of the top? If not, the pump motor may be shorted. Unplug the unit and pull it out of the water. Remove the vent cap on top of the unit and check that the impeller does not have string wound around the base. Turn the impeller by hand to check spin. Plug in unit and check spin. If there is no spin, the pump is probably shorted.

Another indication that the pump motor is not working properly is if the unit won’t climb the walls very far before falling off. The pump motor provides the suction it needs for climbing.

If you’ve tried all these tips and your automatic pool cleaner still isn’t functioning properly, it may be time to purchase a new pool cleaner. Should you decide to make your purchase at SplashPoolParts.com use the coupon code 10percent during checkout and receive a 10% discount on your order.

Have a safe and enjoyable summer in your SplashPool!

Over time (from a few days to a few weeks, depending on how much the pool is used and environmental conditions), your filter will require cleaning. You might notice a loss of suction when vacuuming or an increase in filter gauge pressure. You should clean the filter when the pressure increases 8-10 lbs. above the filter’s initial start-up
pressure.

A. Sand Filter
1. Begin by shutting off power to the system.
2. Move the lever at top of filter from “filter mode” to “backwash mode”.
3. Turn power to the system back on.
4. Continue to backwash until waste water becomes clear. Note: It is a good idea to attach a hose to the backwash outlet of the filter. Run the hose to an area where the water will drain away. Also, be sure the water level remains high enough so as not to lose the prime.
5. When waste water is clear, shut off power to the system.
6. Turn lever back to the “filter mode” setting.
7. Turn pump and filter back on.

B. Cartridge Filter
1. Begin by shutting off power to the system.
2. Close the Ball Valve.
3. Screw a Threaded Plug (found in separate plastic bag) into Return Wall Fitting from the inside of the pool.
4. Open Air Relief Valve.
5. Remove the lid from the Filter Canister.
6. Lift out the Cartridge Filter and clean with a garden hose.
7. Clean Filter Canister by removing Drain Plug at base of filter. Replace plug.
8. Replace Filter Element and reattach lid.

C. Pump Basket
1. Remove pump lid and clean pump basket. Replace lid.
2. Open Ball Valve, remove Threaded Plug from Return Wall Fitting, and close Air Relief Valve.
3. Turn power to the system back on.

WARNING: Pump must be shut off when cleaning